It is metal sections made for the elevator shaft where multiple elevators will run in a shaft a single pillar is used to divide the elevator shafts. The reason it has only one metallique post is that the rear wall is load-bearing and can be fixed directly with wall brackets.
Product code: KA-10-01
The system consists of metal beams, adjustable horizontal units, wall angles brackets, bolts and anchors. The elevator hoistway separator section assemblies are designed to be able to attach the elevator rail guide brackets and clip every one and a half meters.
The guide fasteners and rail guide clip can be mounted on both sides without welding, with a bolted connection to sweep the full distance from the horizontal beam. The elevator shaft compartment set is used in elevator shafts with a depth of 1300 to 1800 mm.
Elevator shaft separator beam and profile assemblies are assembled with bolted connections and contain no welds
Characteristics of the elevator shaft separator
- Designed for semi-load-bearing elevator shafts (brick, concrete block, cellular concrete, etc.)
- Used to separate shaft from 1300 to 1800 mm
- With bolt connection and without welding
- Wall angles, horizontal studs, beams, bolts and anchors are included in the kit.