Kuyu bölmesi seti çift dikme içermektedir Bunun sebebi arka duvarı tuğla olan asansör kuyularını bölmesi için kullanılıyor olmasıdır.
Product code: KA-09-1
All separation beams sections systems include doubl metal beam and column. The reason is that it is used to divide elevator shafts with a hollow back wall. Pillars, horizontal unit, wall brackets, bolts and studs are included in the divider system. The side weight compartment and elevator rail brackets set can be assembled seamlessly with the bolted connections to allow you to make an adjustable metal pylon. This set of shaft compartments is used to separate elevator shafts 1300 to 1800mm deep and is designed to be assembled every 1.5 meters.
Our shaft divider section sets have bolt-on connections and do not contain solder.
Characteristics of the elevator shaft separator
- Designed for non-load-bearing elevator hoistway (brick, concrete block, cellular concrete, etc.)
- Used to separate elevator hoistway from 1300 to 1800 mm
- With bolt connection and without welding
- Wall angles brackets, horizontal studs, beams, bolts and anchors are included in the kit.