The design of the installation for package elevator systems is the most important necessary process to install the device by the existing well characteristics, the international standard, the purpose of use, and to operate smoothly for many years. To install the safest, most economical, convenient, practical, and long-lasting device, it is important to design with the correct calculations beforehand.
Between floors in buildings, transportation is hassle-free for many years before proceeding to lift the load-carrying portion projecting to ensure the specified rated load, cabin load, and wind load, with loads of assistive devices to install the counterweight durable quality, it is necessary to determine the materials that you will be safe. To create the necessary security measures and to provide a comfortable, convenient, sustainable, and safe system in the desired capacity, special solution elevator systems are needed.
The differences between what is planned in the design and what is done during the assembly are very effective in the delivery of the installation installed in the buildings within the specified time. These differences are very important to create the best safe and comfortable arrangement within the specified time. For the differences not to be too much, the first assembly part in the design, which is carefully made with complete and accurate calculations specific to the well, should be done exactly.
Project planning is the certification of the audit carried out by approved organizations. To receive the document, it is necessary to establish the facility with materials per the accounts and standards. That is why design preparation becomes very important for a correct project design. Material selection should be made according to the calculations that enable the design to be made. Projects that are installed as planned during the initial installation can also receive approval from inspections without any problems.
The Rails, which are the Carrier and Guide of the Elevator, are Very Important in All Systems
To whom we have entrusted our lives and property the guarantee of the healthy operation of the elevators, the installation of the system the first installation stage is. There are two assembly stages while the working mechanism of the elevator is being installed. The loads imposed by the elevator are also transferred to the structural support system of the building. That's why the most important installation stage is the first part. At this stage, the rails should be installed with the most accurate calculations, distances, and measurements. Errors made during the installation of the equipment at this stage may cause problems in the second installation stage. Also, after the installation is started to be used, it affects the compatible operation of other equipment that is connected. It is also one of the sources of failure of other equipment of the installation during periodic inspections. Errors in the first stage cause other equipment to deform more at certain December intervals.
According to the characteristics of the well, the brackets that allow the rails to be fixed in the well, that is, the consoles must also be installed correctly in the correct number. The supports installed for fixing the guide equipment in the well are responsible for the sustainability, comfort, and safety of the assembly.
Whether it is a package, a standard type, or a solution system that cannot be installed in a standard type, they are all rails that are the carrier and guide of the elevator.
The First Stages of Assembly
The first stages are the same in all systems.
- Well measurements should be taken very carefully.
- Attention should be paid to the relay receiving part.
- The placement of the well compartments and consoles should be decisive.
- Fasteners should be placed from very high-quality materials.
- It is the laying of the ropes of the guide rails and the completion of the installation.
The Importance of Guide Rails in Package Elevator Systems
For the installation and fixing of the initial equipment for installation to be carried out optimally, an installation strategy should be created. The construction site control should be carried out carefully and the first installation stage should be planned with the correct calculations. Especially the guide and fasteners of a technology that travels at high comfort and speed are gaining special importance.
With the equipment that will offer the best solution according to the well dimensions needed by the project when creating package systems, it is necessary to fix the guide rails in the best way before installing the elevator cabin, suspension, weight carcass, and components. In particular, the installation of the cabin suspension is one of the riskiest parts of the most win-win experience. For this, the installation of guide equipment with the best solid quality and safe materials should be ensured. Much care must be taken.
Rails are equipment that changes height with the effect of heat. On the walls of the well where the installation is installed running concrete material, it is material. It is accepted that the first fixation made when installing rails in facilities does not change the shape of the equipment under the influence of up and down force and moment during movement. It is also considered to be robust enough to hold the cabin and cabin load in the best way during braking. In the most undesirable situations, such as earthquakes, the material should maintain its rigidity when subjected to strong pressure during well length changes. It must be of a quality that will prevent the cabin from getting stuck in the well.
In the assembly strategy, it should be well determined with which materials the installation will be completed. The fasteners used for fixing the guides must also be of very high quality. When the elevator starts to work, durable bearings should be placed to prevent it from opening sideways under any circumstances.
Every power that is not united is puny. (La Fontaine)
It is not enough to choose rails from a durable and high-quality material. At the same time, the holders used when mounting on the wall, that is, the fasteners must also be of very high quality, safe and durable. When the connection is not provided with durable material, the rails become weak over time.
The Importance of the Quality of Consoles Used for Wall Mounting of Guide Rails
The stability and rigidity of the material used to guide the cabinet and counterweight separately in vertical movements in facilities is an important safety issue. Protecting the direction of the opposite and cabin pain during movement and preventing rotation the rails should be able to perform their duties for many years without breaking, deforming, or bending. It also has an important task to keep the cabin for the safety device to be activated in any adverse situation.
All equipment of the elevator is affected by unwanted forces such as seismic loads or an unexpected excessive force load. The well cavity of the guide rails limits the movement of the cabinet and counterweight inside the well preventing it from opening sideways and providing top-down stability and rigidity in our console. That's why the fact that the bearings used are made of durable materials of a quality that will not budge also acquires separate importance. Both the guidance should be made with the best quality material and mounted with reliable quality fasteners that will provide the best strength.
You Can Prevent Damage to the Brake System with Quality Consoles…
It is known in new-generation elevator technologies that cantilever designs in package elevators are effective under the influence of force or moment on the cantilever. The construction characteristics of the structure, the presence of a single or multiple cabins in the same well, and the strength of the supports determine the number of fasteners. It also allows their location to be determined. For the distance between the guide rails and each other along the well to be constant, care should be taken both for their installation with each other and their installation with Decoupage. It should be made with the highest quality materials with the most accurate calculations.
Advantages of EMA Consoles
- EMA consoles have flexible dimensions. Its installation is easily performed for each well. It ensures that the first assembly part is completed smoothly.
- When EMA fasteners are used, it is enough to tell us the elevator type and the number of stops.
- It is necessary to have detailed information about which rails will be used in the selection of the console, the distance between them, the number, and the Decency of the support, nails, bolts, and dowels. The design of the design causes a good analysis of this information with the correct calculations. Otherwise, the project will be started in a problematic way.
- EMA Consoles are available as a set. All necessary products in the same package are located. This prevents material losses and prevents prolongation of the assembly time.
- EMA fasteners have high strength values. It is obvious which strength values the fasteners should have as standard. We use raw materials with good quality certificates for this standard.
- EMA fasteners provide both safe operation and high mobility features, it offers an economical solution.
- They are rail connection systems that are fixed with bolts and clips.
- It will adapt to all installations our special nail designs are available. This, in turn, prevents processing to make the material suitable. It should not be forgotten that every treated headstock will pose a risk to the stability of the carrier system.
- EMA products risk of cracking and fracture there is no.
- Since the old bolt is easily replaced over time, the complete there is no need to replace the fasteners. This allows the product to offer an economical solution.
- With bolted connection, the cantilever material does not weaken over time. October stresses or distortions do not occur.
- In undesirable situations such as earthquakes, it shows a strong resistance because it has a margin of stretching.
- On assembly day well temperature and weather conditions it does not require adjustments to the material.
- They are intelligent equipment that provides solutions to the needs of every well in our ribbed, reinforced, and classic designs.
Use EMA Consoles in your new-generation elevator technologies, so that your facility does not react unexpectedly under the influence of a force greater than normal.